oil filtration

The stainless steel metal filter element is suitable for high temperature, high pressure, high viscosity, high molecular polymer filtration, to filter out solid particles in the medium, and to ensure the cleanliness of the medium; The pleated filter element is suitable for chemical fiber and textile systems; Disc filter elements are suitable for plastic industries such as films and packaging materials.

Seawater cannot be used directly due to its very high salt content. At present, two methods are mainly used to desalinate seawater , namely distillation and reverse osmosis. Distillation is mainly used in super large seawater desalination and places with abundant heat energy. The reverse osmosis membrane method is widely used and has a high desalination rate, so it is widely used. The desalinated water quality is much better than tap water, so it can be used by industry, commerce, residents, ships and ships. In the field of seawater desalination, pretreatment is the key to the long-term stable operation of the reverse osmosis system. The reverse osmosis system needs better pretreatment to reduce seawater turbidity and prevent the growth of microorganisms such as algae in order to produce water quality. If the influent water quality is poor, the water production rate will be very low.

Large-flow filter elements are mainly used in reverse osmosis equipment, seawater desalination treatment, pre-water filtration treatment, etc. Its characteristics are such as folding type, large dirt holding capacity and high flow rate. What we produce is mainly to replace Pall high-flow filter elements, 3M high-flow filter elements, parker high-flow filter elements, etc. Our company produces a complete range of high-flow filter elements , some of which are listed as follows: HF40PP010C01、HF40PP005D01、HF40PP015C01、HF40PP001C01、HF40PP015D01、HF40PP005C01、HF40PP040A01、HF40PP025D01、HF40PP100D01、HF40PP00A01、HF40PP040C01、HF40PP100C01、HF40PP040B01、HF40PP010D01、HF40PP010A01、HF40PP001B01、HF40PP001D01、HF40PP100A01、HFU640UY010JUW、HFU640UY050JUW、HFU640UY100JUW、HFU640UY010JW、HFU640UY050JW、HFU640UY100JW、HFU640UY010H13、 HFU640UY050H13、HFU640UY100H13... The page display is not comprehensive enough, please contact us for more models, looking forward to your consultation.

Multi-layer metal sintered mesh, many people may feel unfamiliar, but it is indeed a widely used filter material in our daily life. Most of them are made of stainless steel, which has high mechanical properties and can improve the overall rigidity. Multi-layer metal sintered mesh filter element has high temperature resistance, corrosion resistance, and high filtration accuracy. It can filter at a temperature of -200°C-600°C and in an acid-base environment, and can exert a uniform filtration accuracy for a filtration accuracy of 1-200um; Multi-layer metal sintered mesh filter element has high strength. After the multi-layer sintered mesh is sintered, it has extremely high mechanical strength and compressive strength; Multi-layer metal sintered mesh filter element is easy to clean, can be used repeatedly, and has a long service life. Easy to process and form, good weldability. Multi-layer metal sintered mesh filter elements are mostly used for the separation and filtration of gases ...

Why do we see bag filters of different colors? What does the color of the bag filter mean? The color of the bag filter actually represents its efficiency, and the colors are white, green, pink, light yellow, and white. Efficiency from F5-F9, we can see the corresponding efficiency from the color, the following is the color corresponding to the efficiency of F5-F9: F5 (EN 799) , 40-60% (white); F6 (EN 779), 60-70% (green); F7 (EN 779), 75-85% (pink); F8 (EN 779) , 85-95% (light yellow); F9 (EN 779) , 99% (white); The complete color of medium-efficiency bag filter means complete efficiency. At the same time, special sizes and specifications can be made according to customer requirements. The outer frame has galvanized frame, aluminum alloy frame, and the thickness of the conventional outer frame: 21mm and 25mm. For more needs, please contact us, and we will answer you throughout the process.

Air filter bags are also called air conditioning system bag filters . According to different efficiency levels, it is divided into G3 and G4 primary effect filter bags, F5, F6, F7, F8 medium effect filter bags, and F9 filter bags. According to different materials, there are glass fiber filter bags, synthetic fiber filter bags, and non-woven filter bags. Air filter bags generally 21mm thick aluminum frame or galvanized frame. Aluminum grooves are added in front of each filter bag, and metal ribs are added to fix it in the back, which increases the strength of the filter bag. Non-woven filter bags Each filter bag is divided into six partitions on the width of the bag to prevent the filter bags from being over-expanded by wind pressure, blocking each other, and reducing the filtration area and efficiency. Air filter bags features: Synthetic fiber filter bag, non-woven filter bag is made of synthetic fiber through special weaving method, which avoids the discomfort that may be caused by ...

The outer frame of the plate-and-frame air filter is composed of high-quality stainless steel plates, which are used to fix the folded filter material. The diagonal design on the outer frame can provide a large filtration area and make the inner filter material tightly adhere to the outer frame. The surroundings of the filter are bonded to the outer frame with special professional adhesive glue, which can prevent air leakage or damage caused by wind resistance pressure. This type of filter element has a solid structure, stable filtering effect, and long service life; it is generally used in the coarse, medium and high-efficiency filter systems of air conditioners, which can prolong the service life of bag filters and HFPA filters, and can also be used for coarse Filter. Our company has rich technical experience and produces high-quality air filters , which can meet your production and use needs. Welcome to cooperate.

The oil filter refers to the filtering equipment for filtering hydraulic oil, which is generally composed of a housing and a filter element. According to the material of the filter element, it can be divided into paper filter element oil filter, chemical fiber filter element oil filter, glass fiber filter element oil filter, stainless steel filter element oil filter, etc. According to the structural form, it can be divided into mesh type oil filter, line gap type oil filter, folded element type oil filter, sintered type oil filter, magnetic oil filter and so on. According to the location of the oil filter , it can also be divided into oil suction oil filter, pipeline oil filter and oil return oil filter. However, considering the self-priming performance of the pump, the oil suction filter is generally a coarse filter. Our company produces oil filters and supporting filter element products to meet your production needs. Welcome to consult.

Natural gas dust filter is also called powder sintered filter. The metal powder sintered filter element is made of SS 316L metal powder through high temperature vacuum sintering. It has the characteristics of high mechanical strength, high temperature resistance, corrosion resistance, good permeability, and controllable pore size and pores. The powder sintered filter element can be installed simply and conveniently, which is very practical. In terms of installation, the occupation and space area are also small, which meets the needs of actual production, and can also achieve a very efficient dust removal effect. And with the high-tech practical design, it can show stronger professional strength in the practice of continuous progress and development. Metal powder sintered filter element not only better exerts its advantages and quality in the dust removal equipment, but also shows more excellent strength in the comprehensive application practice.

The structure and material of candle filter elements Candle filter element is also called stainless steel sintered filter element. The filter element is made of standard five-layer sintered mesh after superposition and vacuum sintering. The sintered mesh used to make candle filter elements generally has a five-layer structure, which is divided into five parts: protective layer, filter layer, separation layer, reinforcement layer and support layer. This kind of filter material not only has stable filtration precision, but also has high strength and rigidity. It is a new type of ideal filter material for the filter environment that requires high compressive strength and uniform filter strength. Because its filtration mechanism is surface filtration and the mesh channel is smooth, the candle filter element has excellent backwash regeneration performance and can be used repeatedly for a long time, especially suitable for continuous and automatic operation processes.

The hydraulic filter element is a filter device used to filter out impurity particles in the system. The hydraulic filter element can guarantee the cleanliness of the system. The use of hydraulic filter elements is becoming more and more widespread. In this case, how to maintain the hydraulic filter element and how often do you need to replace the hydraulic filter element? Under normal circumstances, the hydraulic oil needs to be replaced after the hydraulic filter has been running for 2,000 hours, otherwise it will cause low filtration efficiency and pollute the system. Because most hydraulic system failures are caused by pollution, it is very important to replace the hydraulic filter element in time. For the maintenance of the hydraulic filter element , in addition to paying attention to the use time, it is also necessary to check the smell, viscosity, and color of the oil in time, and pay attention to the air humidity and oil pressure in time. If you work in a place with low tempe...

Duplex oil return line filter is generally composed of two single cylinder filters and two six-way reversing valves. During the working process, when the filter element of the single cylinder filter is clogged to a certain extent and needs to be cleaned or replaced, the main engine must be stopped to replace the filter element, which not only wastes time, but also cannot meet the continuous working needs of the main engine. The double cylinder filter effectively solves the defects of the single cylinder filter. The filter element can be cleaned or replaced without stopping the machine to ensure the normal and continuous operation of the host. The working feature of the duplex filter is that when one filter element is blocked and needs to be replaced, the other filter can start working as long as the pressure balance valve is opened and the reversing valve is turned without stopping the main engine. Then replace the clogged filter element. This type of duplex filter is widely used...

PE sintered filter element is sintered with ultra-high molecular weight polyethylene. It has a compact and strong structure, can withstand high filtration pressure, and has good corrosion resistance to acid and alkali solvents. Xinxiang odeshin filtration product of PE sintered filter element has uniform pore size distribution, good temperature resistance, good mechanical properties, and strong resistance to organic solvent erosion. PE sintered filter element is mainly used for the filtration of pure water, domestic water, beverage, medical treatment, electroplating solution, emulsion, washing solution, acid-base solution and other liquids and sewage treatment. It can not only filter out suspended solids in the liquid, but also remove liquid Chlorine, organic impurities, color, odor, etc. Welcome to consult and look forward to cooperating with you.

The quality of the a ir filter is good or not, mainly depends on the following three aspects: 1. Waterproof performance; 2. Filtration accuracy; 3. Air permeability. Generally speaking, detection has the following methods: 1. Water test. Put the air filter flat on the ground or table, sprinkle some water on the filter paper; a) If the filter paper seeps water within 5 minutes, it is an air filter made of cotton pulp paper (inferior filter paper); b) If the filter paper seeps water for 2-5 hours, it is made of low-grade wood pulp paper, which can be used, but it will reduce the gas production efficiency of the air compressor (more power consumption and more gas production); c) If 12-15 water seeps, it belongs to mid-grade filter paper; d) If no water seeps in within 24 hours, it is a high-grade filter paper. 2. Look at the light to see whether the filter paper is uniform, whether the light transmittance is good, and whether the surface finish of the filter paper is good. It reflect...

40-inch 5-micron parker high-flow filter element , internal pressure pleated filter element, using deep fine polypropylene or glass fiber membrane as the filter material, with a large diameter of 6 inches/152mm, no center rod, one-way opening, and specially designed The liquid flows from the inside to the outside to ensure that the pollutant particles are intercepted inside the filter element. The super-large flow design reduces the use of filter elements and filters in the same flow application, saving equipment investment costs and labor costs. 40 inch 5 micron parker large flow internal pressure pleated filter Recommendations for water filtration series products: high flow filter cartridge, pleated filter cartridge, string wound filter cartridge, liquid bag filter cartridge.

Hydrophilic PVDF series filter element is made of hydrophilic PVDF membrane, which has good chemical compatibility and corrosion resistance, and has no fiber shedding. Hydrophilicity of the filter material is relatively good, and the aqueous solution can be filtered without pre-wetting treatment, saving operation time. Features below: 1. Hydrophilic membrane does not need pre-wetting The filter element adopts hydrophilic filter material, which can be used directly without pre-wetting treatment, saving operating time and reducing costs. 2. Good chemical compatibility PVDF membrane has good chemical compatibility and good resistance to a variety of chemicals, and can be used to filter a variety of strong corrosive liquids, especially acidic liquids.

Oil-water separation filter element is mainly designed for oil-water liquid separation , and it contains two kinds of filter elements: coalescing filter element and separation filter element. For example, in the oil dewatering system, after the oil flows into the coalescing separator, it first flows through the coalescing filter element, which filters out solid impurities and coalesces extremely small water droplets into larger water droplets. Most of the coalesced water droplets can be separated from the oil by their own weight and settled into the sump.

The selection of metal sintered filter element needs to consider the filter medium and filter value. The flow rate through the filter, the use environment and different uses require different filters. Here are a few things to consider when choosing a filter element: 1. Pore size: also in micron scale, the pore size defines the size of the medium you need to filter 2. Pressure drop: refers to the pressure loss generated when liquid or gas flows through the filter. You must determine your environment and provide this to the filter manufacturer. 3. Temperature range: How hot is the working environment of the filter element in its operation, the metal alloy you choose for the filter element must be able to withstand the temperature of the working environment. 4. Strength: Sintered filter elements are the best choice for high strength, and another advantage is that they have the same strength in forward or reverse flow. Odeshin Filtration Company focuses on customized production and p...

Correct selection of replacement filter elements - OEM We all know that in actual production and use, how to purchase alternative imported filter elements has become a difficult problem for many users. Because the imported filter element is an important element of filtration, their main function is to filter impurities in the fluid, so how to choose is very important. As a filter element manufacturer, we give the following suggestions for your reference: ​​ 1. Identify the supplier. Users are generally more concerned about the price of the filter element when choosing a filter element. At this time, it is very important to choose a supplier. Because at this time, it is not only the price but also the reliability of the supplier that needs to be compared. Regardless of the price, you must choose a supplier of the nature of the company, and you must not fail to contact the supplier in the process of contact. ​​ 2. The choice of filter element quality, after selecting a supplier, it is n...

The oil and gas separation filter element is a device that separates the gas in the lubricating oil to ensure the normal operation of the lubricating system. The working principle of the oil and gas separation filter element : the air compressed from the main engine head of the compressor carries oil droplets of different sizes. The large oil droplets are easy to separate through the oil and gas separation tank, but the small oil droplets must pass through the micron Grade glass fiber filter media for filtration. Correct selection of the diameter and thickness of the glass fiber is an important factor in the filtering effect. After the oil mist is intercepted, diffused and polymerized by the filter material, the small oil droplets quickly aggregate into large oil droplets, which pass through the filter layer under the action of aerodynamics and gravity and settle at the bottom of the filter element. The oil is continuously returned to the lubrication system through the inlet of the oi...

Natural gas filter element is a kind of equipment element specially used in natural gas, which plays a role in separation. Using this product, the debris inside the pipeline and the wall peeling can be well filtered out, so that the natural gas transportation process is safer. This kind of equipment usually uses stainless steel metal mesh as the main filter material to ensure the smooth passage of natural gas and good sewage discharge effect. In addition, good sealing performance is also more secure. Each natural gas receiving station uses natural gas filter elements produced by natural gas filter element manufacturers to ensure equipment safety.It is also the best choice for everyone.

https://youtube.com/shorts/kdD0E67Fy04?feature=share

Both sintered mesh and sintered felt are new filter materials made of stainless steel, featuring corrosion resistance, high temperature resistance, and stable filtration accuracy. Both are widely used in nuclear industry, petrochemical, aerospace, food and medicine, metallurgical machinery, power electronics and other fields. From the material point of view: The sintered mesh is made of multiple stainless steel woven meshes of the same or different types stacked together, after repeated pressurization, rolling and repeated vacuum sintering at 1260 °C and then diffusion and solid solution. It has strong mechanical properties. strength and overall rigidity; The stainless steel sintered felt is made of fine metal fibers of different wire diameters through non-woven laying, overlapping configuration and high temperature vacuum sintering at 1180°C. From the sintering process: The sintering process of the sintered mesh is to sinter several layers of stainless steel metal woven meshe...

When the air compressor oil and gas separator works for a period of time, more dust is adsorbed on the filter element, and the gas resistance passing through the air compressor oil and gas separator increases. When the circulating gas resistance is higher than 6.3KPa, the air filter clogging sensor installed between the air filter and the turbocharger transmits the signal to the air filter clogging indicator light on the instrument panel. When the indicator light is on, the air filter should be serviced at the same time. There are many reasons and troubleshooting methods for the failure of the air compressor oil and gas separator. For details, please refer to the following address. For a ir compressor oil separator

https://youtu.be/AMxfvKW7Qt8

Compressed air is an important power that is widely used in various fields of industry. The compressed air in all compressed air systems comes from the atmosphere, which contains large amounts of dust, water vapor, and underburned hydrocarbons and bacteria. In addition, air compressor lubrication systems generate contaminants such as wear particles and oil. Even oil-free compressors produce these substances. And this oil is acidic, and it is an inferior oil that does not have any lubricating effect. The outer layer of the precision filter element adopts a hydrophobic foam sleeve that is resistant to oil and acid chemical corrosion, which prevents the coalesced liquid from re-entering the airflow and ensures high-efficiency oil and water removal. The filter layer is made of hydrophobic glass fiber material, which has high filtration efficiency and good passability, and has a good filtering effect on particulate impurities and droplets.

The main filter material of the five-layer mesh filter element adopts a standard five-layer sintered mesh. Standard five-layer sintering is made of five layers of stainless steel wire mesh superimposed by vacuum sintering. The filter element made of it has the characteristics of strong corrosion resistance, good air permeability, high strength, easy cleaning and reverse cleaning, accurate filtration accuracy, hygienic and clean filter material, and non-shedding wire mesh. Multi-layer metal sintered mesh is a new type of filter material with high mechanical strength and overall rigidity. It is made of multi-layer stainless steel wire mesh through special lamination pressing and vacuum sintering. The meshes of each layer of wire mesh of the sintered mesh filter element are staggered to form a uniform and ideal filtering structure, which makes the material have the advantages that ordinary wire mesh cannot match, such as high strength, good rigidity, and stable mesh shape.

When the filter element of the single-cylinder filter is blocked to a certain extent and needs to be cleaned or replaced, the main engine should be stopped to replace the filter element, which not only wastes time, but also cannot meet the continuous work needs of the main engine. But Our ODESHIN double-cylinder filter effectively solves the shortcomings of single-cylinder filter. The filter element can be cleaned or replaced without stopping the machine to ensure the normal and continuous operation of the main engine. When one filter element is clogged and needs to be replaced, it is not necessary to stop the main engine work, just open the pressure balance valve and turn the reversing valve, the other filter can participate in the work, and then replace the blocked filter element.